-
GradeSGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D + ZSteel GradeSGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D + Z
-
Tolerance±1%TypeGalvanized
-
Model Number0.7mm, 1.0mm, 2.0mm, 4.0mmAlloy Or NotIs Alloy
-
ApplicationConstructionDelivery Time22 ~ 30 days
-
Processing ServiceBending, Welding, Punching, Decoiling, CuttingSpecial UseCold Heading Steel
-
StandardGB
1 mm Galvanized Steel Wire for Hanger and Hook Fabrication
Galvanized steel wire has an actual 1 mm diameter selection for hanger and hook fabrication requirements. Other model references mention 0.7, 2 and 4 mm, which are not separate selectable options here.
Define the required base steel grade, coating route, delivered condition and dimensional tolerance. Confirm hot dip galvanizing when it is essential to the process. High ductility and easy bending wording does not provide a numerical elongation or forming acceptance limit; evaluate the selected condition against the required hook geometry.
A hanger drawing should identify bend radii, end details and the final component dimensions. This distinguishes wire supply acceptance from the separate performance requirements of a completed hanger or hook.
