SUS410 Stainless Steel Shot 0.6-2.0mm for Blasting and Finishing

• type

  blasting media
  customized support

  OEM
• model number

  Round and as-cut
  usage

  shot blasting, polishing, finishing
• abrasive grain sizes

  0.6-2.0mm(0.02-0.08in)
  Hardness

  42-53hrc, 41-59HRC(388-509hv)
• Shape

  Round
  Product name

  SUS410 cast stainless steel shot 0.6-2.0MM for blasting
• Other name

  blasting media stainless steel shot
  Shot blasting

  stainless steel, aluminum, zinc,copper
• Size

  0.6mm-2.0mm or custom
  Usage

  blasting
• Roundness

  G1 G2 G3
  SUS GRADE

  SUS410
• Density

  7.8g/cm3
  Packing

  25kg /bag package 40 bags/ pallet

SUS410 stainless steel shot is offered for blasting, polishing and finishing inquiries in a described 0.6-2.0mm size range. The actual selectable combination is 2.0mm with Stainless Steel wire, which should be specified when requesting a quotation.

Distinguish the range from the selection

The 0.6-2.0mm description provides context for a size discussion, while 2.0mm is the available grit choice. If another diameter is needed, ask for a separate confirmed supply specification instead of assuming it is included in the selected configuration.

Confirm how the SUS410 shot is made

For a requirement specifically calling for cast stainless steel shot, obtain confirmation of the manufacturing route. Also agree whether the supplied particles are round, as-cut or conditioned, since the process designation and particle form affect how the media should be evaluated.

• SUS410 is the stated stainless grade.
• 2.0mm is the available size selection.
• Shot blasting is a stated operation.
• Polishing and finishing are also identified uses.
• Roundness requirements can be specified before a trial.

Set the hardness acceptance basis

Request one applicable hardness specification and its test method for the selected SUS410 batch. For stainless steel, aluminum, zinc or copper workpieces, confirm the desired finish through a representative trial before approving the media for the production blasting process. Keep the agreed SUS410 manufacturing route and 2.0mm particle specification with the trial record, particularly if the finishing process requires a consistent rounded media condition.