DX51D Z80 Q195 Q235 GI Galvanized Steel Coil Requests | Zinc Roll Width and Fabrication Selection
-
CoatingZ40~Z600HardnessFull Hard
-
Spangle TypeRegular Spangle, Regular Spangle, Minimum Spangle, Zero Spangle, Big SpangleThickness0.12-3.00mm, 0.12mm - 3.00mm or Customized
-
TypeSteel CoilApplicationMaking Pipes, Cutting Sheets, Making Small Tools, Making Corrugated Sheets, Making Container, Making Fences
-
CertificateAPI , CE, RoHS, SNI, BIS, Saso, PVOC, SONCAP, SABS, SIRM, TISI, KS, JIS, Gs, ISO 9001Delivery Timewithin 7 days
-
GradeSGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51LengthCustomer's Requirement
-
Oiled or Non-oiledNon-oiledProcessing ServiceWelding, Punching, Cutting, Bending, Decoiling
-
Skin PassYesStandardASTM
-
TechniqueHot Rolled BasedTolerance±1%
-
Product NameGavanized Steel GI RollSteel GradeSGCC/SGCD/SPCC/SPCD/DX51D/DX52D/SGHC/G550/S280GD/S350GD
-
SurfaceHot DippedSurface TreatmentGalvanized
-
Zinc Coating40 - 600 g/m² or CustomizedWidth600mm - 1500mm or Customized
-
MOQ1TonPackageStandard Seaworth Packing
DX51D Z80 Q195 Q235 GI Galvanized Steel Coil Requests | Zinc Roll Width and Fabrication Selection
GI galvanized coil has actual width bands of 900–1000, 1001–1250, 1251–1500 and 1501–2000mm paired with unitless specification 0.6. The body gives 0.12–3.00mm thickness and 600–1500mm or custom width.
Technical zinc coating is 40–600g/m² or customized. Confirm the widest width, gauge unit and Z80 acceptance basis. DX51D, Q195 and Q235 requests require a selected substrate standard rather than treating the full grade catalogue as equivalent.
Non-oiled delivery, skin pass and several spangle choices are recorded. Specify cut-sheet or coil supply and any welding requirements. The title standard list does not establish simultaneous compliance, a forming limit or structural performance; obtain the applicable material and coating inspection documents for the intended configuration.
