DX51D Z80 Q195 Q235 Galvanized Steel Coil Inquiry | GI Zinc Coating and Width Selection

• Coating

  Z275~Z600
  Hardness

  Full Hard
• Spangle Type

  Regular Spangle, Regular Spangle, Minimum Spangle, Zero Spangle, Big Spangle
  Thickness

  0.12-3.00mm, 0.12mm - 3.00mm or Customized
• Type

  Steel Coil
  Application

  Making Pipes, Cutting Sheets, Making Small Tools, Making Corrugated Sheets, Making Container, Making Fences
• Certificate

  API , CE, RoHS, SNI, BIS, Saso, PVOC, SONCAP, SABS, SIRM, TISI, KS, JIS, Gs, ISO 9001
  Delivery Time

  within 7 days
• Grade

  SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51
  Length

  Customer's Requirement
• Oiled or Non-oiled

  Non-oiled
  Processing Service

  Welding, Punching, Cutting, Bending, Decoiling
• Skin Pass

  Yes
  Standard

  ASTM
• Technique

  Hot Rolled Based
  Tolerance

  ±1%
• Product Name

  Gavanized Steel GI Roll
  Steel Grade

  SGCC/SGCD/SPCC/SPCD/DX51D/DX52D/SGHC/G550/S280GD/S350GD
• Surface

  Hot Dipped
  Surface Treatment

  Galvanized
• Zinc Coating

  40 - 600 g/m² or Customized
  Width

  600mm - 1500mm or Customized
• MOQ

  1Ton
  Package

  Standard Seaworth Packing

Agree the base steel and coating specification before selecting this galvanized coil.

Coating designation

The title requests Z80, while the description also gives Z275–Z600 and a broader measured coating range. Confirm the actual designation and measurement basis for the order rather than assuming these references are interchangeable.

Width and thickness

The specification choice is labelled 0.6 without an explicit unit. Four width ranges extend from 900 to 2000 mm, beyond the described width scope, so confirm actual slit width and thickness together.

• Actual base steel grade
• Confirmed thickness and unit
• Selected usable width
• Coating mass and test basis
• Spangle and surface condition

Processing requirements

Hot dipped surface, skin pass and non-oiled delivery are described. Specify forming, welding and cutting needs; broad grade and certificate lists do not verify every grade/coating combination or project compliance.