-
CoatingZ10-Z275HardnessFull Hard
-
Spangle TypeRegular SpangleThickness0.12-5mm(0-0.20in)
-
TypeSteel SheetApplicationMaking Pipes, Cutting Sheets, Making Small Tools, Making Corrugated Sheets, Making Container, Making Fences
-
CertificateAPI , CE, RoHS, SNI, BIS, Saso, PVOC, SONCAP, SABS, SIRM, TISI, KS, JIS, Gs, ISO 9001Delivery Timewithin 7 days
-
Gradegalvanized steel sheetLengthas customers' requirement
-
Oiled or Non-oiledNon-oiledProcessing ServiceWelding, Punching, Cutting, Bending, Decoiling
-
Skin PassYesStandardJIS
-
TechniqueCold Rolled BasedTolerance±1%
-
Product NameGalvanized Steel Sheet PlateSurfaceGalvanized Coated
-
ShapeCoil.PlateKeywordGalvanzied Sheet
-
MOQ1 TonMaterialSGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Q195-q345
-
Special UseWear Resistant SteelColorCustomized Color
-
SpangleRegular SpangeSurface TreatmentPassivation Treatment
DX51D DX52D DX53D EN10147 Z275 Galvanized Steel Plate, 10 mm Requirements
Galvanized steel sheet has four actual width bands covering 900–2000 mm. Described thickness is 0.12–5 mm, with customer required length and a cold rolled base.
Confirm a requested 10 mm gauge separately because it exceeds the described range. Select the exact DX51D, DX52D, DX53D or SGCC material and define EN10147 and Z275 acceptance against actual documentation. The Z10–Z275 code has no area unit and needs a measurement basis.
Specify coil versus cut plate delivery, non-oiled condition and passivated regular spangle surface where required. Full hard and wear resistant wording do not provide numerical hardness or abrasion results. General construction applications and certificate references do not establish structural capacity or verified compliance for the selected plate.
