商品描述
-
typeblasting mediacustomized supportOEM, ODM, OBM
-
model number0.1mm 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mmusagecleaning, peening, shot blasting
-
abrasive grain sizes0.2mm, 0.3mm, 0.5mm, 0.7mm, 1.0mm, 1.2mm, 1.4mm1.7mm, 2.0mm, 0.4mm, 0.6mm 0.8mmHardness42-53hrc, 31-50HRC
-
ShapeCylinder, CylinderProduct nameStainless Steel Shot Pellets Granules Media 0.2/0.3mm 304 316 410
-
Size0.1-3.0mmChemical compositionC,Mn,Si,S,P, Cr, Ni
-
MOQ1 TonDensity7.4g/cm3
-
Durability7800~9300 TimesPackage25kg/bag*40 Bags /pallet
-
ApplicationShot peening of foundries
304, 316 or 410 stainless steel shot pellets should be specified by alloy and particle grading. Requests for 0.2mm or 0.3mm media need confirmation against the actual supplied distribution.
- Stainless Steel is the material choice.
- Cylinder is the stated particle form.
- The size-option label spans 0.1mm-3mm.
- Ten numeric grit labels are available.
- Cleaning and peening are described uses.
Identify the required alloy
Ask which 304, 316 or 410 composition is offered. The single Stainless Steel option does not establish three separate alloy configurations.
Agree the fine-size grading
State the required 0.2mm or 0.3mm distribution. Numeric grit choices and a broad size range do not confirm a diameter-specific delivery.
Confirm form and hardness
A cast-shot request should be checked against the cylindrical particle description. Obtain the applicable hardness and material documents before using the stainless pellets in a foundry peening or cleaning process.
