Z100 Hot-Dip Galvanized Steel Coil | Construction and Appliance Material Specification
-
HardnessFull HardThickness0.12-0.8
-
TypeSteel CoilApplicationMaking Pipes, Cutting Sheets, Making Small Tools, Making Corrugated Sheets, Making Container, Making Fences, Container Plate
-
CertificateCE, RoHS, SNI, BIS, Saso, PVOC, SABS, TISI, KS, JIS, Gs, ISO 9001Delivery Timewithin 7 days
-
Length2000-12000mm or customizedStandardAISI ASTM DIN GB
-
Tolerance±1%Product NameHot Dipped Galvanized Steel Coil
-
MaterialSGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Q195-q345MOQ5 Tons
-
Payment term30%TT Advance + 70% BalanceSurfaceGalvanized Coated
-
SampleSample FreelyZinc Coating40-275g/m2
-
PackageSea-worth PackageQualityHigh-quality
-
AdvantageCustomize Service
Z100 Hot-Dip Galvanized Steel Coil | Construction and Appliance Material Specification
Hot dipped galvanized coil has an actual 609–1250mm specification and 900–1000mm width selection. The body describes 0.12–0.8 thickness without a unit and 2000–12000mm or customized length.
The recorded zinc coating range for this coil is 40–275g/m². The title Z100 request needs an agreed coating designation and test basis rather than an assumed conversion. Confirm what the specification dimension represents and select the required substrate grade from the broad catalogue.
For appliance or construction fabrication, state thickness with units, width, surface appearance and coil versus cut-sheet supply. Full hard is recorded without mechanical values. The application terms do not establish forming performance or appliance approval; obtain grade-specific material identification, coating acceptance and dimensional inspection requirements for the proposed coil.
