Stainless Steel Wire Rope – Diameter Choices for Handrail and Railing Projects
-
Tolerance±1%TypeDrawn Wire, Wire Rope Clip
-
Model Number10mm 2mm 0.8mm 4mmAlloy Or NotIs Alloy
-
ApplicationRopeDelivery Time15-21 days
-
Special UseFree Cutting SteelStandardBS, AISI.ASTM.EN.BS.GB.DIN.JIS.etc
-
Product nameStainless Steel Wire RopeMaterialASTM/AISI/SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Q195-q345
-
Key wordWire ropeSurfaceStainless steel
-
UsageConstruction StructureDiameter1mm-190mm
-
PackingWooden ReelSurface treatmentBlack Painting
Stainless steel wire rope is identified for construction projects, including handrail and railing enquiries.
Railing rope specification
The diameter menu contains 18 choices from 1mm through 50mm; it is a selection list rather than proof that every diameter has the same strand construction.
- Eighteen diameter selections.
- 1mm minimum menu label.
- 50mm maximum menu label.
- Construction-structure application.
- Strand construction to specify.
Define the assembly
State the selected diameter, required rope construction, finish, cut length and end fittings. The 0.8mm, 2mm, 4mm and 10mm title requirements must be checked against the available choice labels before purchase.
Request grade and load documentation
Confirm the actual stainless alloy and coating condition for the chosen rope. Railing, sling and construction wording does not establish an assembly working load, corrosion classification or approved lifting use. Obtain configuration-specific inspection and design acceptance for any load-bearing installation.
