Galvanized Loop Tie Binding Wire with 0.7–4.0mm Range and 20–280 g/m² Zinc Entry
-
FunctionBaling WireGalvanized TechniqueHot Dipped Galvanized
-
Surface TreatmentGalvanizedModel Numbergalvanized wire
-
Delivery Time15-21 daysProcessing Servicegalvanized wire
-
TypeLoop Tie WireProduct namegalvanized wire
-
Tensile Strength350-550Mpazinc coating20-280g/m2,
-
Coil weight1kg-1000kgs/coilTechniqueElectro or hot dipped Galvanized
-
Wire Diameter0.35-4.2mmElongation10%-15%
-
PackingCoil or SpoolsApplicationbinding wire or woven wire mesh
This galvanized loop tie wire is described for binding or woven wire mesh, with a selectable 0.7–4.0mm diameter range. The exact diameter must be agreed within that range rather than assumed from a fixed size option. Listed technical entries are 350–550 MPa tensile strength, 20–280 g/m² zinc coating and 10–15% elongation.
Confirm the selected delivery condition
Specify the base material, required diameter and tolerance, then agree hot dip or electro galvanizing for the order. Confirm the coating, tensile and elongation values applicable to that selected supply. Provide loop geometry and finished length if prepared ties are needed, or the manufacturing feed requirements for woven mesh. The broader descriptive 0.35–4.2mm span is not an additional selectable range. No mesh strength, corrosion life or universal forming performance is established.
