Electro Galvanized Low Carbon Binding Wire | 0.7–5.6mm Requirement and Mesh Selection
Создать QR-код
Product description
-
FunctionBinding WireGalvanized TechniqueElectro Galvanized
-
Surface TreatmentGalvanizedModel Numberwire
-
Delivery Time8 ~ 14 daysProcessing ServiceCutting
-
Typegalvanized wireWire Gauge0.5mm-4.0mm
-
Product nameBinding Wire Function and 0.7mm-5.6mm Wire Gauge galvanized wireColorSilvery
-
MaterialLow Carbon Steel WireApplicationWoven Wire Mesh
-
PackingWoven BagSurfaceEelctro Galvanized
-
Tensile Strength350-550N/mm2Coil weight1kg-1000kgs/coil
-
CertificateISO9001:2008
This electro galvanized low carbon wire listing identifies binding and woven mesh procurement uses.
Diameter scope
The title describes 0.7–5.6 mm while the detailed gauge is 0.5–4 mm. Actual choices are 0.8, 1, 1.2, 2 and 2.5 mm, so confirm any size outside that menu separately.
Condition and format
The source states 350–550 N/mm² tensile strength without assigning conditions to each size. Define the required steel grade, length and winding format for the actual binding or weaving process.
- Chosen measured diameter
- Actual low carbon grade
- Electro coating requirements
- Cut or coil arrangement
- Mechanical inspection basis
Mesh application boundary
Wire suitable for a mesh inquiry is not a finished mesh specification. Provide opening size and fabrication requirements separately and obtain the applicable wire evidence rather than infer coating density or finished mesh performance from the title.
