DX51D Z80 Q195 Q235 Galvanized Steel Coil Inquiry | GI Zinc Coating and Width Selection
Создать QR-код
Product description
-
CoatingZ275~Z600HardnessFull Hard
-
Spangle TypeRegular Spangle, Regular Spangle, Minimum Spangle, Zero Spangle, Big SpangleThickness0.12-3.00mm, 0.12mm - 3.00mm or Customized
-
TypeSteel CoilApplicationMaking Pipes, Cutting Sheets, Making Small Tools, Making Corrugated Sheets, Making Container, Making Fences
-
CertificateAPI , CE, RoHS, SNI, BIS, Saso, PVOC, SONCAP, SABS, SIRM, TISI, KS, JIS, Gs, ISO 9001Delivery Timewithin 7 days
-
GradeSGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51LengthCustomer's Requirement
-
Oiled or Non-oiledNon-oiledProcessing ServiceWelding, Punching, Cutting, Bending, Decoiling
-
Skin PassYesStandardASTM
-
TechniqueHot Rolled BasedTolerance±1%
-
Product NameGavanized Steel GI RollSteel GradeSGCC/SGCD/SPCC/SPCD/DX51D/DX52D/SGHC/G550/S280GD/S350GD
-
SurfaceHot DippedSurface TreatmentGalvanized
-
Zinc Coating40 - 600 g/m² or CustomizedWidth600mm - 1500mm or Customized
-
MOQ1TonPackageStandard Seaworth Packing
Agree the base steel and coating specification before selecting this galvanized coil.
Coating designation
The title requests Z80, while the description also gives Z275–Z600 and a broader measured coating range. Confirm the actual designation and measurement basis for the order rather than assuming these references are interchangeable.
Width and thickness
The specification choice is labelled 0.6 without an explicit unit. Four width ranges extend from 900 to 2000 mm, beyond the described width scope, so confirm actual slit width and thickness together.
- Actual base steel grade
- Confirmed thickness and unit
- Selected usable width
- Coating mass and test basis
- Spangle and surface condition
Processing requirements
Hot dipped surface, skin pass and non-oiled delivery are described. Specify forming, welding and cutting needs; broad grade and certificate lists do not verify every grade/coating combination or project compliance.
