DX51D Galvalume Aluzinc Coil Inquiry | Z181–Z275 Coating and Galvanized Route Requirements
-
CoatingZ181 ~ Z275HardnessFull Hard
-
Spangle TypeZero SpangleThickness0.12-0.8
-
TypeSteel CoilApplicationMaking Pipes, Cutting Sheets, Making Small Tools, Making Corrugated Sheets, Making Container, Making Fences, Container Plate
-
CertificateCE, RoHS, SNI, BIS, Saso, PVOC, SABS, TISI, KS, JIS, Gs, ISO 9001Delivery Timewithin 7 days
-
GradeSGCC/SGHC/CGCC/DX51DLength2000-12000mm or customized
-
Oiled or Non-oiledNon-oiledProcessing ServiceBending, Welding, Decoiling, Cutting, Punching
-
Skin PassYesStandardAISI ASTM DIN GB
-
TechniqueHot Rolled BasedTolerance±1%
-
Product NameHot Dipped Galvanized Steel CoilMaterialSGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Q195-q345
-
MOQ5 TonsPayment term30%TT Advance + 70% Balance
-
SurfaceGalvanized CoatedSampleSample Freely
-
Zinc Coating40-275g/m2PackageSea-worth Package
-
QualityHigh-qualityAdvantageCustomize Service
Identify the actual coating composition before selecting this requested galvalume or aluzinc coil.
Coating system
The title requests galvalume and aluzinc, while the detailed product name identifies hot dipped galvanized coil. Confirm zinc versus aluminium-zinc coating composition and the applicable designation rather than treating the names as equivalent.
Dimensions and units
The specification option reads 609–1250 mm and the width choice is 900–1000 mm. Confirm what each measures, along with the actual thickness and the unit of the 0.12–0.8 description.
- Base grade and coating identity
- Actual thickness and units
- Usable width and supply form
- Coating mass and test basis
- Surface and inspection criteria
Document acceptance
A separate zinc coating mass and several certificate names are listed. Obtain order-specific evidence for the chosen system; these references do not establish BIS, JIS or GS certification, corrosion life or aluminium-zinc content.
