-
HardnessFull HardSkin PassYes
-
Surface TreatmentNon-oiledThickness0.5 mm ~ 1.0 mm, 0.6MM-2.5MM
-
TypeSteel CoilAlloy Or NotNon-Alloy
-
ApplicationFor drawing of automobilesCertificateAPI , RoHS, BIS, JIS, ISO 9001
-
Delivery Time8 ~ 14 daysGradecarbon steel, HC340/590DP
-
Oiled or Non-oiledNon-oiledProcessing ServiceWelding, Punching, Cutting, Bending, Annealed
-
StandardAISITolerance±5%, ±1%
-
samplefreeAdvantageLarge stock available, immediate delivery
-
Width90-2000mmHardness For stampingSoft state High strength: Hard state
-
Trade TermFOB, CFR, CIFsurface treatmentBright finish, matte finish, oiled (anti-rust), non-oiled
-
Payment30% deposit is requiredTrade typeFOB, CIF, DDP, etc.
DC03 SPCD Cold Rolled Carbon Steel Coil, 0.3–3.5 mm Drawing Requirements
Cold rolled carbon steel coil has customized length and width selections, with described width 90–2000 mm. Thickness entries include 0.5–1.0 mm and 0.6–2.5 mm.
Confirm the exact 0.3–3.5 mm requirement and availability outside the descriptive ranges. Select DC03 or SPCD explicitly; HC340/590DP is a separate grade reference rather than an automatic equivalent. Define annealed or full hard condition to match the intended drawing operation.
Clarify the scrap wording in the requested identification and the required delivered material condition. Resolve oiled versus non-oiled finish and ±1% versus ±5% tolerance. No automotive approval, draw depth, elongation or certified mechanical result is supplied. General stock and processing descriptions do not prove immediate availability of the selected grade and dimensions.
