-
typeOthercustomized supportOEM, ODM
-
model number304usagecleaning, rust removal, strengthening, peening
-
abrasive grain sizesP40-P320Hardness42-53hrc
-
ShapeIrregularProduct nameSteel Shot
-
KeywordSteel shot,Stainless steel shot, steel wire cut shotSizeCustomizable Size
-
Materialstainless steelAppearanceIrregular circle
-
SamplesupportUsageClean rust, sand blast, grind, clean oxide
-
QualityHigh qualityPackageCarton Box
304 steel shot for sandblasting can be considered for surface preparation, rust removal and oxide-cleaning enquiries. If your request specifies 0.5mm, 1mm or 1.5mm media, confirm the actual grading and hardness before selecting a grit option.
- The 304 model focuses the stainless steel shot request on the intended material.
- 0.5mm, 1mm and 1.5mm requirements should be confirmed as actual particle distributions.
- Irregular-circle shape matters when selecting 304 media for surface preparation and rust cleaning.
- A high-hardness request needs the applicable test basis for the proposed 304 supply.
- Sample support can help evaluate the 304 shot against the required workpiece finish.
Turn the diameter request into a specification
The menu provides Stainless Steel material and grit labels including 20, 30, 36, 40, 46, 54, 60, 80, 100, 120, 150, 170 and Other. Supply the required millimetre diameter separately, since these labels do not establish a conversion for a 0.5mm, 1mm or 1.5mm order.
Check 304 hardness and particle form
The model is 304 and the shape is described as irregular or an irregular circle. Request the applicable hardness specification and a clear particle-form acceptance criterion; a high-hardness search requirement does not prove that a particular batch meets your process limit.
Plan the surface preparation assessment
Rust cleaning, sand blasting, grinding and oxide cleaning are named uses for this stainless steel shot. Discuss the substrate and target surface with the supplier, and confirm any strengthening or peening requirement separately from a general surface-cleaning application.
A sample enquiry for this 304 shot should include the requested diameter, size distribution and operating equipment. Approve the actual material and shape for the intended finish before moving from a rust-removal trial to a production order.
