30/60 Mesh Garnet Sand | Sandblasting and Surface Preparation Inspection Requirements
-
warranty1 Yearstypeblasting media
-
customized supportOEMmodel number30/60
-
usageShot Blastingabrasive grain sizes30/60
-
Hardness9 mohsShapeRound, Granule
-
ColorBlackMOQ1 Ton
-
AdvantageHigh Working EfficiencyPackage25kgs/bag
-
StandardJB/T 8337Raw materialSteel
-
QualityPremiumCertificationMSDS
-
Warranty1 Year
30/60 Mesh Garnet Sand | Sandblasting and Surface Preparation Inspection Requirements
Garnet sand has actual Garnet material with 30/60 grit and specification entries. The source describes round granules and gives a 9 Mohs hardness label for blasting media.
Confirm the grading method, particle distribution and required geometry through a selected sample and test record. The 30/60 label should not be converted automatically to a precise diameter range without the applicable standard. Agree material and hardness acceptance.
For surface preparation, specify substrate, equipment and desired finish. The catalogue has no measured removal rate, roughness or abrasive-life result. Request composition and grading evidence before trial; JB/T8337 or MSDS wording does not validate every sandblasting process or guarantee a particular surface condition under the proposed operating parameters.
