0.7 0.8 1.2 1.6mm Hot Dipped Galvanized Iron Wire | Diameter and Coating Selection
Создать QR-код
Product description
-
CoatingZ30~Z40HardnessMid Hard
-
Spangle TypeZero SpangleThickness0.12 ~ 0.2
-
TypeSteel CoilApplicationMaking Pipes, Cutting Sheets, Making Small Tools, Making Corrugated Sheets, Making Container
-
CertificateAPI , ISO 9001Delivery Timewithin 7 days
-
Gradeq235Oiled or Non-oiledNon-oiled
-
Processing ServiceWeldingSkin PassYes
-
StandardASTMTechniqueHot Rolled Based
-
Tolerance±1%Surface TreatmentElectro Galvanized
-
StatusSoft StateStrength of Extension300-1550MPa
-
Manner of PackingWoven BagTransport PackageSea Transportation
-
Wide in Width0.35mm-6.0mmMetal Wire DrawingCold Drawing
-
Zinc Coating8g-300G/M2
0.7 0.8 1.2 1.6mm Hot Dipped Galvanized Iron Wire | Diameter and Coating Selection
Hot-dipped galvanized iron wire is identified by the original 0.7, 0.8, 1.2 and 1.6mm diameter title. Specify the individual required wire size and tolerance.
The retained electrogalvanized and steel-coil descriptions are excluded from this title-led hot-dipped wire specification. Select the underlying steel grade, zinc-coating acceptance and required surface condition through the supply record. A sheet-style width option does not identify a wire diameter. Request chemistry and dimensional inspection, together with coating evidence for the chosen batch. The title does not establish a numerical tensile class or a tested corrosion-life result under the intended conditions.
