S780 2.5mm Steel Shot Requests | Alloy Steel Material Choices and Particle Grading
-
typeOthercustomized supportOEM, ODM, OBM
-
usagerust removalabrasive grain sizes60, 220, 80, 120, 400
-
HardnessGH60-68HRC,, 9.0Shapesphere
-
Product nameSteel ShotApplicationPolishing Workpiece
-
Abrasive Grain SizesRequirmentColorBlack
-
MaterialAl2O3SizeCustomer Size
-
UsagePolishing CarbideMOQ1 Ton
-
PackageBag
S780 2.5mm Steel Shot Requests | Alloy Steel Material Choices and Particle Grading
Steel shot is supported by its title and product name, with actual Alloy Steel and Alloy cast steel material choices. Actual grit labels are 20, 30, 36, 40, 46 and 54 without a stated dimensional standard.
The S780 or 2.5mm requirement is not a separate actual option. Specify alloy, casting route, particle geometry and target hardness through selected product documents. GH60–68HRC wording needs an applicable test record and should not be assigned automatically to every size or material choice.
For rust removal or polishing, supply workpiece and equipment requirements. The source has no tested removal rate, conditioning level or service-life result. Request particle shape, grading and chemistry evidence before evaluating suitability; no equivalence between S780 and the numbered options is asserted.
