S170 Alloy Steel Shot, 0.5mm for Rust Removal and Sandblasting

• type

  blasting media
  customized support

  OEM, ODM
• model number

  S70 -S930
  usage

  rust removal,polishing,casting
• abrasive grain sizes

  0.5mm(0.02in)
  Hardness

  42-53hrc
• Shape

  spherical
  appearance

  spherically
• category

  Sandblasting medium
  density

  7.4g/cm3
• standard

  SAE J444
  purpose

  shot peening
• chemical composition

  C,Si,Mn,S,P,Cr
  hardness

  40-51HRC,50-55HRC,60-68HRC
• model

  S70 S110 S130 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930

S170 alloy steel shot is described with a0.5mm reference for rust removal,polishing and sandblasting. The actual choice is Alloy Steel,grit35 and a0.2–3.0mm specification range,requiring a confirmed physical distribution.

Match the0.5mm requirement to the offer

Ask which supplied grading supports the S170/0.5mm request. The broad range and grit35 do not independently prove that every particle matches a fixed diameter.

• Alloy Steel is the actual material.
• Grit35 is the selectable label.
• 0.5mm is the parameter reference.
• Spherical form is described.
• Rust removal is a named use.

Specify hardness and heat treatment

42–53HRC and additional hardness bands need one applicable condition. Secondary-quenching wording should be supported by the actual processing and inspection records rather than treated as a performance guarantee.

Complete the peening or cleaning specification

Density is stated as a technical reference in the original data. Request composition,grading and applicable SAE J444 records,then evaluate the selected shot against the workpiece's acceptance criteria.