Q195 Galvanized Round Binding Wire in 12 Diameters with 350–550 N/mm² Tensile Entry
-
FunctionBinding WireGalvanized TechniqueHot Dipped Galvanized
-
Surface TreatmentGalvanizedModel Numbergalvanized iron wire
-
Delivery Time8 ~ 14 daysProcessing ServiceBending
-
TypeRound wireProduct nameGalvanized Low Carbon Binding Wire
-
SurfaceElectro Galvanized, Hot Dipped Galvanized, CustomizedApplicationconstruction, rebar tying, mesh weaving, binding, tying, packaging
-
PackingPlastic woven bag, hessian cloth, small coil packing, CustomizedWire diameter0.3 mm-4.0 mm, BWG8-BWG30, Customized
-
Tensile strength350-550 N/mm2MaterialLow Carbon Steel Q195
This Q195 low carbon round binding wire has twelve diameter choices from 0.4mm to 5mm, including actual 4mm and 5mm entries. The listed tensile range is 350–550 N/mm². Select the required measured size and confirm the delivery condition applicable to that tensile acceptance.
Gauge and surface agreement
For BWG requirements, identify the exact gauge and measured diameter rather than assuming a conversion from the descriptive gauge span. Confirm hot dip or electro galvanizing and the required surface acceptance. The 5mm option exceeds the descriptive 0.3–4.0mm range and needs size confirmation. Provide tie geometry, length or mesh feed requirements as applicable. Rebar tying and fencing use do not establish structural reinforcement capacity, coating quantity or corrosion life from the wire description alone.
