Hot Dipped Galvanized Q195 Iron Wire for Construction | 0.8–4mm Loop Tie Selection
Generar código QR
Product description
-
FunctionBinding WireGalvanized TechniqueHot Dipped Galvanized
-
Surface TreatmentGalvanizedDelivery Time22 ~ 30 days
-
Processing ServiceWelding, Bending, Punching, Decoiling, CuttingTypeLoop Tie Wire
-
Product nameGalvaized Iron WireMaterialQ195 Low Carbon Steel Wire
-
SurfaceGalvanziedApplicationBuilding Material
-
StandardGB/T343 StandardsCoil weight1kg-1000kgs/coil
-
Tensile strength350-550N/mm2Wire GaugeBWG8-BWG22
-
PackingCustomers's RequirementPAYMENT TERML/C T/T (30% Deposit)
Nine diameter choices support a Q195 hot dipped galvanized binding wire specification for construction tying.
Size and loop selection
The menu spans 0.8–4 mm with intermediate choices including 1.2, 1.5, 1.8 and 2.5 mm. The loop tie type still requires an agreed loop shape, cut length and end arrangement.
Material and inspection
Q195 low carbon steel and a 350–550 N/mm² tensile range are recorded. Confirm the actual delivery condition and how the GB/T343 reference applies to the proposed diameter.
- Selected measured diameter
- Required loop dimensions
- Coating inspection criteria
- Mechanical test basis
- Cut or coil arrangement
Building application limits
Construction binding does not establish structural reinforcement approval. Obtain material and dimensional evidence for the tie configuration, and clarify BWG conversion rather than assume every gauge label represents the same finished wire dimension.
