GI Galvanized Iron Wire – 11 Gauge and BWG Size Selection for Fabrication

• Coating

  Z10 ~ Z29
  Hardness

  Soft
• Spangle Type

  Minimum Spangle
  Thickness

  0.5-16mm(0.02-0.63in)
• Type

  Galvanized Steel Wire
  Model Number

  BWG8 10 12 4 16 18 20
• Application

  Making Pipes, Cutting Sheets, Making Corrugated Sheets, Making Small Tools, Making Container, Making Fences
  Certificate

  CE, RoHS, ISO 9001
• Delivery Time

  8 ~ 14 days
  Grade

  reinforcement/protection/heat preservation
• Length

  125-10204m(410.11-33477.69ft)
  Oiled or Non-oiled

  Non-oiled
• Processing Service

  Welding, Punching, Cutting, Decoiling, Bending
  Skin Pass

  Yes
• Standard

  GB/EN/ASTM/DIN
  Technique

  Cold Rolled Based
• Tolerance

  ±1%

Galvanized iron wire is identified with 11 gauge in the title and several BWG model references.

Gauge and surface selection

Hot-dipped and electric-galvanized routes are mentioned, so the required finish should be selected rather than assumed identical.

• 11-gauge title requirement.
• Multiple BWG model references.
• Hot-dipped route mentioned.
• Electric-galvanized route mentioned.
• No populated size choices.

Confirm the finished section

No populated diameter menu is supplied. State the gauge system, finished dimension, tolerance and cross-section needed by the fabrication process. The broad thickness and length references do not establish an inspected diameter or a continuous available size range.

Set order acceptance

Provide the intended forming or binding operation and coating requirement. Generic sheet, pipe and container-making applications do not prove that every route fits the selected wire. Request the applicable material, dimensions and coating inspection before trials, without relying on unverified certificate lists or general quality claims.