GB/T343 Carbon Steel Wire Inquiry | 1.5mm Annealed BWG19 Mesh Making Requirements
-
GradeQ195 Q235 SAE1006 SAE1008Steel GradeQ195 Q235 SAE1006 SAE1008, Low/High Carbon Steel
-
Tolerance±1%TypeDrawn Wire
-
Model NumberSAE1006/1008, SWRH72B,B2B,Q195 Q235etcAlloy Or NotNon-Alloy
-
ApplicationConstruction,wire drawing,Netting,Nail,PackagingDelivery Timewithin 7 days
-
Processing ServiceBending, Welding, Punching, DecoilingSpecial UseFree Cutting Steel
-
StandardAiSi,ASTM,GB,JIS,EN,DIN,bsProduct NameCarbon Steel Wire
-
Steel GradesSAE1006, 1008, 1010, 1045, 1060, 1070, 70#, 72A, 82B, etc.Steel TypeLow Carbon Steel,Medium Carbon Steel ,High Carbon Steel
-
Production ProcessCold Drawn, Hot Rolled, Annealed, Patented, Oil TemperedSurface CoatingUncoated , Galvanized, Phosphate Coated, etc.
-
Diameter0.10mm - 12.00mm or CustomizedTechnologyCold Drawn Hot Rolled
-
PackageStandard Seaworth PackingMOQ5 Ton
-
Payment terms30%TT Advance + 70% Balance
Define actual material condition and wire dimensions before selecting feedstock for mesh making.
Gauge and diameter
The actual choices include 1.5 mm among thirteen diameters. Confirm the BWG19 convention and required measured diameter rather than assuming an automatic conversion between the title references.
Grade and process
The detailed list spans low, medium and high carbon materials with several delivery processes. Select one actual designation and verify annealing and surface instead of treating every drawn, patented or oil tempered alternative as the same supplied wire.
- Actual steel designation
- Gauge convention and diameter
- Annealing or delivery condition
- Selected surface coating
- Mesh forming and joining tests
Mesh acceptance
A broad diameter scope and processing services are described. Agree standard-specific inspection and downstream tests; the GB/T343 title does not establish certification, weld quality, mesh strength or suitability for a completed enclosure.
