ASTM A572 Gr50 Q355B Q345B Sheet Pile Requests | 400×100×10.5mm U and Z Foundation Sections
-
GradeGB,JIS,EN,AISI,DINstandardStandardASTM, GB,JIS,EN,AISI,DIN
-
Tolerance±1%Alloy Or NotNon-Alloy
-
Delivery Timewithin 7 daysInvoicingBy Theoretical Weight
-
Processing ServiceBending, Welding, Decoiling, Punching, CuttingProduct NameSteel Sheet Pile
-
MaterialType2 Type3 Q235 S275 S355 Sy290 Sy295 Sy390 Q235 Q345,etc.ShapeU/C/Z/T Type
-
Width450-750mm or CustomizedHeight8-600mm or Customized
-
Thickness3.0-97mm or CustomizedSectional Area70-300CM2/M or Customized
-
Length6m/9m/12m or CustomizedPayment TermT/T(30% Deposit+70% )
ASTM A572 Gr50 Q355B Q345B Sheet Pile Requests | 400×100×10.5mm U and Z Foundation Sections
Steel sheet pile has an actual 400×100×10.5mm dimension choice. The body lists U/C/Z/T shapes, 6m/9m/12m or customized length and several steel grades. Bending, welding and cutting are recorded processing services.
The actual 400mm dimension needs a profile drawing because the descriptive width starts at 450mm. The body also gives height 8–600mm, thickness 3–97mm and sectional area 70–300cm²/m or customized; these broad ranges do not validate the chosen section.
Select the requested A572 Gr50, Q355B or Q345B grade with appropriate documents rather than assuming equivalence to the body catalogue. Specify interlock and foundation requirements. No retaining capacity, watertightness result or completed foundation design is established by the listing.
