PVC-Coated Fence Wire with Separate Core and Outside Sizes
Specify PVC-coated wire with two dimensions: the metal core diameter and the finished outside diameter. They describe different parts of the product and should remain separate in the RFQ. Our coated-wire catalogue offers a starting point; confirm the actual core, coating and intended fence-forming use before approving an offer.
Keep the two diameter checks independent
State the core diameter and its tolerance, then state the coated outside diameter and its tolerance. Agree how each will be measured and how a coated sample will be prepared for a core check. Do not let a single size range silently stand for both measurements.
Approve colour through a physical reference
Name the colour reference and agree the surface appearance you expect under defined viewing conditions. A screen image helps identify a candidate but is an unreliable final colour standard. Retain an approved sample when colour consistency matters, and define how later batches will be compared with it.
Confirm the core material and zinc condition
The selected listing describes a galvanized core, but the actual material and coating requirement still belong in the order. If your fence application needs a particular zinc basis, define the evidence and acceptance method. PVC colour cannot reveal the metallic core or establish its corrosion performance.
Test the coating through the intended bend
A straight wire sample does not show every issue that may appear during weaving, wrapping or bending. Trial the actual forming operation and inspect the bends and contact points against an agreed acceptance basis. Record the tooling and sample identity so the result describes a repeatable production condition.
Separate appearance checks from service qualification
Look for the coating defects relevant to your process, such as exposed core or damage at tight bends. Define the inspection coverage and treatment of defects before approval. A visually sound sample does not by itself establish outdoor service life; environmental performance needs its own specified evidence.
Protect the outside surface during transport
Agree wrapping, separation and handling that suit the destination and prevent unnecessary abrasion. Keep colours and diameter combinations clearly separated in the packing list. Any special label or packing service should be confirmed in the offer rather than assumed from an illustrative packing image.
Check coil geometry against the payoff equipment
Provide the coil opening, outside envelope, weight and tie arrangement that your handling system accepts. Include the direction and access needed for the free end. A coil can meet wire dimensions and still feed poorly if it is supplied in an unsuitable shape or damaged during handling.
Freeze the approved combination for repeat orders
Store the core specification, finished diameter, colour reference, coil format and trial result together. Review any proposed change in core source, coating system or packing against that record. A repeat purchase should refer to the approved combination, not only to a broad name such as green fence wire.
Send a two-diameter coated-wire enquiry
Share both diameter requirements, the selected core material, colour reference and fence-forming operation. Add coil dimensions, order quantities and destination. We can discuss the catalogue candidate and confirm the actual sample, packing and documentation scope needed for a quotation against your complete wire specification.
